Tested on every run — not sampled at the end
Insulation resistance, dielectric strength and dimensions are checked as part of production, so a batch cannot reach packing having skipped a gate.
The four gates every batch passes
Each gate has a defined check and a record. If a check fails, the batch is corrected before the next stage — not sorted afterwards.
Copper in
Purity and continuity of the copper supply are verified before drawing. Conductivity starts with the metal, not the machine.
Drawing & annealing
Diameter and anneal are held to the construction sheet. Even annealing is what gives a winding wire its flex life inside a motor.
Insulation & bonding
Layer thickness, gel bonding, tape overlap and concentricity are checked on the line for each construction — PVC, TPR, gel bonded or taped.
Electrical & dimensional test
Insulation resistance (20 GΩ on the gel bonded range), dielectric behaviour and finished dimensions, then packing with a dispatch record.
What we test, and why it matters to you
| Insulation resistance | Measured on the wound wire and on finished cable. Low IR is the first sign of moisture ingress — the failure that kills submersible motors. |
|---|---|
| Dielectric strength | Confirms the insulation survives the voltage stress of the application, with margin. |
| Conductor dimensions | Diameter and strand count, so resistance per metre matches the quoted size. |
| Insulation thickness | Layer thickness and concentricity, so the cable fits the slot or gland it was specified for. |
| Mechanical behaviour | Flex and abrasion behaviour in handling and installation — checked on constructions where it decides service life. |
| Packing & records | Length, labelling and dispatch records, so a query can be traced back to the batch. |
Documentation
Test certificates, material details and specification sheets are issued with supply where the order requires them. Ask for the documentation you need at enquiry stage and it is quoted along with the material.
The three decisions that set wire quality
Copper
Oxygen-free, annealed bare copper. No mixed scrap, no substitution that shows up as heat in service.
Insulation & gel
Bonded polyester gel, BOPP / Mylar tape, PVC, TPR, modified PA, silicon and thermoset polymers — specified per product, tested per batch.
Construction
Single, double and triple sheathed builds, safety walls and water-treeing resistant designs for wet, buried and overhead service.
Want our test parameters before you order?
Tell us the application and the standard you work to. We will send the construction sheet and the tests we run against it.